Explore previously closed farm equipment auctions all in one place. Review past listings, see what equipment have already run through the platform, and get a better feel for the types of inventory featured in our transparent, no-commission auction marketplace.
For sale is a reliable, heavy-duty 1,000-gallon above-ground propane tank in solid, good shape. This size is ideal for whole-home heating, large backup generators, farm use, shops, or commercial
1,000 gallons total (holds roughly 800 usable gallons at the safe 80% fill limit).
Dimensions: Approximately 16 feet long by 41 inches in diameter.Weight: Empty weight is roughly 1,600 to 1,700 lbs.
Listing for a Neighbor. 1974 1066 Turbo, PTO and 3 point work. We are not sure the hours but the hour meter says 1300. Torque Amplifier Transmission. Been on feed wagon, runs well. Decent tread on back tires left. 2 SCVs PTO: Independent, 540/1,000 RPM
Hydraulics: Open center, approximately 21 GPM total flow
Rear lift: approximately 5,600 lb
Fuel capacity: about 42 gallons
I am selling my 2017 Case CX26C Mini Excavator. It has enclosed cab, 827 hours, and has been used seldom the last 3 years. Pins seem tight, paint job looks good with some minor dings and scratches. Tracks have a lot of life yet and the engine starts right away and runs well. I have had no issues with it. Reason for selling is we don’t use it much. Has a Kubota engine weighs around 5500lbs. Comes with 2 buckets, a 12inch and an 18inch. Also comes with a quick attach coupler, as seen in the photos. All around clean machine, with a lot of life left for someone that will use it more than me.
Has Auxiliary hydraulic hookups for a thumb if someone wanted to add a thumb.
1983 John Deere 4050 2WD, Sound-Gard Cab, 6,050 Hrs, 466 Diesel. We used it for haying and odd jobs around the farm. Like new front tires, recently replaced the water pump. AC blows cold and heat. 2 SCVs 540/1000PTO. Also has 3 point, everything is functional as it should be. A nice opportunity to purchase an early 50 Series 4050 Sound guard Cab with the desirable 466 diesel and Quad-Range transmission. Just had a fresh oil change. Power steering of course. Rear tires are getting towards the end of their life. Comes with a piece of plexi glass covering the back window. We installed that to protect the back window from rocks hitting it while baling hay. Has Block Heater as Well
Selling our 1998 664 New Holland Baler. We used this for a few years as our second baler. When we bought it the first owner had just put all new roller bearings in it and said it had 3400 bales on it. The bale command plus display says 2000 something bales but that is not correct. We put around 200-300 bale on the baler since we bought it. So it is a fairly low bale count baler. We have been running nylon twine, it wraps well and gave us no issues this year putting up ditch hay.
It runs off of a 540 PTO, has one hydraulic line for the baler pickup and requires one set of SCV’s for the chamber door. Makes 5×6 bales. Always shedded on our farm, greased and maintained. Paint looks good, a couple normal wear spots, paint chips, and minor dents. Comes with the command baler plus interface and has one like new rim and tire.
Selling this G5 Display. Bought it a couple years ago as a spare and haven’t needed it. It does NOT have any active activations. If you want to autotrac or section control you will need to buy a yearly subscription for it.
Power plug in harness is Not included. It didn’t come with one when I bought it for some reason.
Features a 12.8-inch touchscreen with 1080p high-definition resolution
Built with a processor that is three times faster than previous models for quicker cold boot times and smoother navigation
Very nice 2008 630 MoCo I am the second owner bought from a dealer. Small family farm owned. Well maintained cutter bar and gearbox oil changed yearly, cleaned and stored inside when not in use. Has upgraded hydraulic pitch adjustment, aftermarket groovy tires in great condition, outback hose wraps on individual hoses and big wrap to protect all hoses. Has 540 pto.
All cutter bar drive gears inside the cutter bar where all replaced in 2024 due to one bearing failure so decided to have them all replaced done by a local Deere dealer with paperwork to prove, around $8,000 repair.
Had the opportunity to upgrade into a bigger mower is only reason for selling.
Great mower field ready
2012 Case Ih 1240
-12-30”
-A little over 10k acres
-AgLeader Electric Row clutches on every row
-Hydraulic Drive
-Yetter Floating row cleaners
-Corn and Bean plates.
-Stand alone harness for a pro 700 for fold functions.
-Ag leader tractor side harnesses required to run Ag leader monitor.
*New last season
(Seed boots, Frogs, Closing arm bushings, Closing discs, Gauge wheel pins, new wing tires, 48 cell corn plates, Had meters ran, Fan hydro lines, Bull pull Hitch).
Going to a 16 row. Ready to plant!
I have a like new Vermeer 504r signature baler. It’s been a great machine with no problems. Has an atlas bale monitor. It is a net only machine. It has only 1675 bales. I’m the only owner of this machine. It has been barn kept when not in use. It went through the shop last winter just for general maintenance and tuning. Comes with a roll and a half of Vermeer net. It’s ready for its new owner. Only getting rid of because I’m getting out of the haying business.
I’m selling my Peck 10inch by sixty six, foot grain auger, 540 PTO, this auger has all new bolts in the flighting sections, good flighting, new bearings, we upgraded to a low profile dual auger hopper with rubber tires. This auger is ready to go for harvest. The auger tires are around 30 percent tread.
1997 Polaris 4×4 400 ATV — Homestead Utility Vehicle
Polaris 4×4 400 ATV in working condition and ready for its next owner. Pictures are an honest representation of damage and dirt. I’m not asking for a lot of money. Remember you are looking at a 29 year old 4 wheeler. It has always been used as a homestead support/utility vehicle and has never been used for plowing.
Aftermarket suspension
Good tires that hold air
New rear brakes
Recently had approximately $900 in work/maintenance
Needs a battery
No trailer included
This ATV has been a dependable utility machine around the homestead and has not been abused as a plow vehicle.
Sold as-is. No warranties, expressed or implied.
2022 Bobcat T770. Very good condition. It has 654 hrs. A/C and heat led cab with heated seat. 2 speed with reverser fan. Window tint all around. Has been ranch used for fencing, driveway work and stacking hay. I’m the 2nd owner bought it with 425 hrs. Only problem has been a fuel descending unit which was covered by warranty.
2021 Honda Talon 1000×4. 3385 miles 150 hours. Has bump seat in middle for kids. Unit has MTX Radio, fox live valve suspension , flip up 3 position windshield. Tires are in good shape. Well maintained and cared for. Decals are starting to peel off the doors some. Only selling to upgrade to a new model.
Selling our GC36 EZ Trail Header Cart. Not sure what the year is. I reached out to EZ Trail and we came to the conclusion the serial number is missing as it was not in the normal location. We estimate the year of the machine to be around 2015. Tires have good life left in them. Has brakes and lighting package, E-Z Lift telescoping/extendable tongue with spring lift assist. We used it to haul our 35 ft Draper around. Always shedded during the off season. Trails well, is a good all around trailer. Patented acme screw E-Z Handcranks allowing wrench-free, quick angle and height adjustments of the upper rail to fit diverse corn and grain platforms. Selling because we got a bigger head.
Selling our 2016 John Deere Hydraflex Platform 635FD. Reason for selling, we upgraded combines, and then got a bigger head. This bean head has some add-ons featuring the Lankota bean saver brush kits in front of the feeder house and on the center canvas. It also has the shark fin crop diverter and the crop dividers on the outsides of the platform. Hydraflex works as it should.
This has been a great machine, the sickle sections are good, and the guards are all there. All three canvas are in great condition with no rips. The reel is in great condition. This head is field ready after the grease zerks get a couple squirts. We had this head on our 9770 and it works on our S680 as well. Great machine, hooked it up and ran it before listing. No codes came up, works exactly how it should. Reel fore/aft works and so does the raise and lower. Blown off and shedded after the season. Did not get used in 2025 because that is when we got our bigger head. We kept it that first season as a spare. Harvested less than 1000 acres most years.
I am selling my 2017 Case CX26C Mini Excavator. It has enclosed cab, 827 hours, and has been used seldom the last 3 years. Pins seem tight, paint job looks good with some minor dings and scratches. Tracks have a lot of life yet and the engine starts right away and runs well. I have had no issues with it. Reason for selling is we don’t use it much. Has a Kubota engine weighs around 5500lbs. Comes with 2 buckets, a 12inch and an 18inch. Also comes with a quick attach coupler, as seen in the photos. All around clean machine, with a lot of life left for someone that will use it more than me.
Has Auxiliary hydraulic hookups for a thumb if someone wanted to add a thumb.